I'm really hoping the FF team will complete their integration with One Signal which will fully open

I'm really hoping the FF team will complete their integration with One Signal which will fully open up opportunity to integrate push notifications. At the moment you can only integrate push notifications by downloading your project code and integrating manually.

Vvice i seem to be getting stuck on importing my current batch i have been stuck on 1...

vice•2/6/24, 11:00 PM

so update, finally got to 2k records imported after like 2 hours...
idk if i can be at my current location for that long and might disconect from the internet to move...
does this mean i will have to restart from scratch ?

vice•2/7/24, 1:27 AM

nvm it looks like it fully uploaded

Yohan•2/7/24, 2:47 PM

Hey guys! I need help here trying to retrieve information about a supabase table
I basically receive an error telling me the url is not correct

Yohan•2/7/24, 2:47 PM

I am trying to use the getRow Supabase Node. I have added my API key, URL endoint and created a simple table called test . But this does not work

YYohan Hey guys! I need help here trying to retrieve information about a supabase table...

Gaurav Chadha•2/7/24, 3:02 PM

Hi @Yohan, the node is working fine. You can confirm the project URL again and https://supabase.com/dashboard/project/project-id/settings/api. Also you can ensure that RLS policy is disabled or configured. https://docs.buildship.com/tutorials/supabase-crud.

GGaurav Chadha Hi <@958335093531897896>, the node is working fine. You can confirm the project ...

Yohan•2/7/24, 3:15 PM

Thanks. Yeah everything seems to be setup correctly in the node. I have disabled RLS but still get the same error

YYohan Thanks. Yeah everything seems to be setup correctly in the node. I have disabled...

Gaurav Chadha•2/7/24, 3:18 PM

Try deleting the node and adding again from the node explore and then test. It should work fine.

GGaurav Chadha Try deleting the node and adding again from the node explore and then test. It s...

Yohan•2/7/24, 3:23 PM

Yes i have tried that but still no luck.

GGaurav Chadha Try deleting the node and adding again from the node explore and then test. It s...

Yohan•2/7/24, 3:24 PM

Ok it's working now. I had to create another buildship account and start over

GGaurav Chadha Try deleting the node and adding again from the node explore and then test. It s...

Yohan•2/7/24, 3:26 PM

but for some reason it won't work with my other account. Even by starting a new fresh workflow

shadow monarch•2/7/24, 5:21 PM

hey twilio is paid

shadow monarch•2/7/24, 5:22 PM

can i build a chatbot exlsind in the latest video for whtsapp free

shadow monarch•2/7/24, 5:22 PM

or without twilio?

shadow monarch•2/7/24, 5:29 PM

Or can anyone guide how can I use nexmo in place of twilio or any third party which is free

Tthedigitalpro I'm really hoping the FF team will complete their integration with One Signal wh...

Rosson Long•2/7/24, 7:38 PM

Been watching your crash courses. They’re really good!!

RRosson Long Been watching your crash courses. They’re really good!!

thedigitalproOP•2/7/24, 7:39 PM

Thank you very much. Very kind of you.

adrfinance•2/8/24, 9:05 AM

@Gaurav Chadha I have an SQL query on Buildship. When I run it on its own everything works fine. When I run it as part of the workflow I get an error Failed to execute workflow. Any idea why this happens?

boilermanc•2/8/24, 11:30 AM

ok, random question, but what platform do you guys use for you docs site? i like it...

Bboilermanc ok, random question, but what platform do you guys use for you docs site? i like...

Shams•2/8/24, 12:09 PM

https://github.com/rowyio/buildship-docs it opensource!

GitHub

GitHub - rowyio/buildship-docs

Contribute to rowyio/buildship-docs development by creating an account on GitHub.

SShams https://github.com/rowyio/buildship-docs it opensource!

boilermanc•2/8/24, 12:10 PM

sweet! exactly what i was looking for. this could be run on my own server? you guys are running it on the git server?

Bboilermanc sweet! exactly what i was looking for. this could be run on my own server? you g...

Shams•2/8/24, 12:15 PM

we use vercel for it, but i think you can run it anywhere with some effort

SShams we use vercel for it, but i think you can run it anywhere with some effort

boilermanc•2/8/24, 12:19 PM

lol, i'm all into effort. thanks!

bodzio•2/8/24, 9:39 PM

Do any of you also have a problem with disappearing values? Yesterday I was working with my workflow, I set all the necessary values, everything worked correctly, and today all the value fields are empty....

bodzio•2/8/24, 9:42 PM

HHarini Hi <@1170044613940215997> - so the API call work via postman and not with test p...

entreds•2/8/24, 10:44 PM

This issue repeats for a third time this week. And each time, your team needs 2 days to restore the API functionality. I am very disappointed.

jak•2/9/24, 9:37 AM

Hey guys! i'm making solid progress on building out our buildship API but have an issue. I'm working on a workflow with multiple branches, and I'm looking for a way to consolidate data from these branches at the end of the workflow. However, I'm encountering errors when trying to access values from branches that were not executed in the current flow request. Is there a workaround to access variables or data from non-executed branches in Buildship? Ideally, I'd like to retrieve the value from whichever branch was run and use it for further processing. Any advice or suggestions on how to achieve this would be greatly appreciated.

In the example below, I need to check to see if the row exists in supabase, if not then i need to create the row (on the branch). The trouble is that further down the workflow, I cant find a way to use the row id from whichever node was run. Thank you!

Pyr0Lover•2/9/24, 11:46 AM

Can I not login into rowy without a gmail/outlook account?

Pyr0Lover•2/9/24, 11:46 AM

There is no way to sigin with email???

PPyr0Lover Can I not login into rowy without a gmail/outlook account?

Gaurav Chadha•2/9/24, 2:28 PM

Nope, only specified provider signup option is available.

bonidom•2/10/24, 9:03 PM

Guys, tell me why it doesn’t take the data from the check, I connected everything to firebase and cloud.google, but when I load the check as a picture, it’s completely silent https://screenrec.com/share/84y31khvzG

10.02.2024_23.50.33_REC

Recorded with ScreenRec

fikrilal•2/11/24, 2:14 AM

Hello. I encountered an error when updating a row in Supabase, where it always throws a null result. Does anyone know the solution? And is my query filter correct?

Thank you

adrfinance•2/12/24, 8:18 AM

Hello @Gaurav Chadha ! Is there a way to export my project from Buildship?

adrfinance•2/12/24, 8:18 AM

So that I can upload it to Gitlab?

Aadrfinance Hello <@699325537612726394> ! Is there a way to export my project from Buildship...

Gaurav Chadha•2/12/24, 10:02 AM

You can only export your project workflows - https://docs.buildship.com/features/api-spec.

adrfinance•2/12/24, 10:06 AM

@Gaurav Chadha and there is no way to import a project into Buildship, correct?

Aadrfinance Hello <@699325537612726394> ! Is there a way to export my project from Buildship...

Shams•2/12/24, 10:08 AM

we're working on built-in git integration, however for now you can export workflow manually, then you can commit it gitlab or paste into a different project

adrfinance•2/12/24, 10:56 AM

@Shams I am having trouble using environment variables. If I create more than 1 (e.g. 5), only 1 of the environment variables has a value, the rest appear as undefined. How can I solve this issue?

Aadrfinance <@711115293111484437> I am having trouble using environment variables. If I crea...

Shams•2/12/24, 10:58 AM

are these project or workflow environment variables, cc @aadityabhusal

adrfinance•2/12/24, 10:59 AM

@Shams @aadityabhusal project.... any ideas?

adrfinance•2/12/24, 11:08 AM

@Shams @aadityabhusal it works for workflow environment variables but not for project environment variables... I don't understand what is happening!

Aadrfinance @Shams <@1147051851032838234> project.... any ideas?

Shams•2/12/24, 11:11 AM

i'm able to reproduce it, so it's bug, we'll keep you posted once the fix is out, should be today/tomorrow

adrfinance•2/12/24, 11:11 AM

@Shams appreciate it, thank you.

adrfinance•2/12/24, 11:27 AM

I also wanted to ask you guys, can I give a name to an empty node and an SQL query so that I can reference to them later in my node logic? @Shams

Aadrfinance I also wanted to ask you guys, can I give a name to an empty node and an SQL que...

Shams•2/12/24, 11:28 AM

can you use workflow env variable for it?

SShams can you use workflow env variable for it?

adrfinance•2/12/24, 11:30 AM

How can I use a workflow env variable for setting a name to an empty node and a SQL query?

Aadrfinance How can I use a workflow env variable for setting a name to an empty node and a ...

Shams•2/12/24, 11:31 AM

i mean to store the sql query. Maybe i didnt understand the usecase correctly

SShams i mean to store the sql query. Maybe i didnt understand the usecase correctly

adrfinance•2/12/24, 11:33 AM

My question is this: At the moment, I am able to create an empty node, but I could not figure out how to give a name to it. The problem then is if I have many empty nodes it becomes problematic trying to remember what each one does, if they don't have a name. Thus, is it possible to give a name to the empty nodes/

adrfinance•2/12/24, 11:33 AM

Aadrfinance My question is this: At the moment, I am able to create an empty node, but I cou...

Shams•2/12/24, 11:34 AM

oh, double clicking on the current name, should let rename it

I'm really hoping the FF team will complete their integration with One Signal which will fully open

Similar Threads